Local Brake Services & Specials

Choose Your Brake Special

Each of our 4 wheel brake jobs include a parts and labor warranty and new front and rear brakes, pads or shoes. Choose one of our brake specials below and then schedule an appointment.

12,000 Miles
Parts & Labor Warranty

4Wheel Brake Job
Basic Package

starting at

$179

  • Free Brake Safety Inspection
  • New Front & Rear Brakes, Pads or Shoes
  • Resurface Rotors & Drums
  • Top Off Brake Fluid

Schedule Appointment

40,000 Miles
Parts & Labor Warranty

4Wheel Brake Job
Premium Package

starting at

$269

  • New Front & Rear Premium Brake Pads or Shoes
  • Resurface Rotors and Drums
  • New Hardware on Front and Rear
  • Brake Fluid Exchange

Schedule Appointment

40,000 Miles
Parts & Labor Warranty

4Wheel Brake Job
Premium Hydraulic Package

starting at

$379

  • New Front & Rear Premium Brake Pads or Shoes
  • New Hardware on Front and Rear
  • Service Front or Rear Calipers or Replace Wheel Cylinders (New Pistons Extra)
  • Resurface Rotors and Drums
  • Brake Fluid Exchange

Schedule Appointment

Don’t Forget

10% Off Everybody Wins Wednesday!

Additional Brakes Services

Disconnect all brake lines from master cylinder un bolt and remove from booster, install new master brake cylinder fill with brake fluid reattach all brake lines and bleed brake system.

Remove master cylinder from booster, remove vacuum hoses, unbolt from firewall and remove.  Install new booster reattach all hoses and master cylinder. Hydraulic brake booster systems have similar process with additional steps and parts.

Brake fluid changed from master cylinder, brake lines, calipers and wheel cylinders.  Add new fluid and pump through system.

Remove brake hose or line, flare ends for proper connection.  Install new lines or hose and bleed system to remove any air.

Check all connections and bleeders, hook up scanning computer, read codes, purge system if needed , and check brake system.

Need something else? No Problem!

HUB ASSEMBLIES AND WHEEL BEARINGS

Remove wheels, brakes and spindle nut, pull off hub remove inner and outer bearing and press out inner and outer races. Clean and inspect hub, press in new races, lube new inner and outer bearings, reinstall hub onto spindle torque spindle nut and reinstall brakes and wheels.

AXLE SEALS AND BEARINGS

Remove wheels and brakes, drain axle fluid, remove pin, pull out hub and axle shaft, press off bearing and seal, press on new axle bearing and seal, reassemble and fill with new axle fluid.

ABS UNIT

Remove and cap brake lines from ABS pump, unplug and remove ABS unit. Mount new unit reattach brake lines and plugs, fill system with fluid, connect to scanner computer, purge and bleed system then test.

CV AXLE

Remove wheels, brakes and axle nut, pull off hub, unbolt from transmission and remove. Install new CV axle bolt to transmission reinstall hub and axle nut reassemble brakes and wheels.

SHOCKS & STRUTS

Remove wheels, unbolt top and bottom, slide out, place in spring compressor and tighten down. Remove strut from coil spring and install new strut, decompress coil spring maneuver back into strut tower, bolt into place and reassemble.

And more!

Our brake repair shop also works on CONTROLE ARMS, TIE ROD END, BALL JOINTS, etc.

Or if you don’t know what your car needs, simply fill out the form below!

Contact Us Today to Get a Free Quote